Showing all 27 results

Close

CNC Shield V4 for Arduino NANO – Stepper Motor Controller

140.00 EGP

3D printer stepper motor driver CNC shield V4 needs to work with Nano board. It can be used as driver

Close

Raspberry Pi Zero W (Wireless)

650.00 EGP

Limit of one per customer (as requested by the Raspberry Pi Foundation). If you need multiples, then consider the Raspberry Pi

Close

Raspberry Pi 3 Model B+

1,400.00 EGP

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor

Close

USB Type-B Male to Type-A Male USB Cable (150cm)

20.00 EGP

High quality molded connectors for tight fit Supports High Speed 480Mbps, Full Speed 12Mbps & Low Speed 1.5Mbps USB A

-7%
Close

46 in 1 Sensor Modules Kit for Arduino +CD

750.00 EGP 700.00 EGP

Description: On the basic of 46 in 1 kit, adds more practical modules to achieve more experimental requirements. Can be

Close

NodeMCU Based ESP8266 Development Kit

140.00 EGP

The NodeMcu is an open-source firmware and development platform that helps you to prototype your IOT product with just a

Close

arduino uno Sensor Shield v5.0 – Arduino Compatible

50.00 EGP

Sensor Shield V5 Expansion Board For Arduino This Sensor Shield expansion board to retains the advantages of version V4.0 on

Close

CNC Shield V3 for Arduino UNO – Stepper Motor Controller

125.00 EGP

Using an Arduino to make a CNC miller ! A4988 Driver CNC Shield Expansion Board for Arduino is an Arduino shield which controls four stepper

Close

Ethernet Shield W5100

185.00 EGP

Tinker.it made a pretty neat little shield called the EthernetShield, so I figured I’d pick up a couple to make

Close

Raspberry Pi Zero

650.00 EGP

Limit of one per customer (as requested by the Raspberry Pi Foundation). Raspberry Pi Zero is a super-small, hackable, and

Close

Raspberry Pi 3 Model B

1,350.00 EGP

The Raspberry Pi 3 Model B is a tiny credit card size computer. Just add a keyboard, mouse, display, power

Close

Proto Shield w/ Breadboard – Arduino Compatible

45.00 EGP

This prototyping shield is the best out there, and now is even better with Version R3 – updated for the most compatibility

Close

Arduino MEGA Sensor Shield V1.0

90.00 EGP

New Arduino MEGA Sensor shields V1.0 special Sensor extension board integrates the advantages of various expansion boards. PCB with first-class

Close

arduino uno Sensor Shield v4.0 – Arduino Compatible

50.00 EGP

Sensor Shield V4 Expansion Board For Arduino The Arduino Sensor Shield V4.0 allows plug and play connection to various modules

Close

Prototype Shield V3 w/ Breadboard – Arduino MEGA 2560 Compatible

95.00 EGP

This shield is compatible for the Arduino Mega 2560 layout and features two onboard LEDs, a reset switch, stackable headers

Close

Arduino UNO Arcyclic Casing Box

40.00 EGP

1. This case is made from high-quality acrylic material, which has the advantages of good high-temperature resistance, impact resistance 2.

Close

Arduino MEGA Arcyclic Casing Box

45.00 EGP

Product Description 1. This case is made from high-quality acrylic material, which has the advantages of good high-temperature resistance, impact

Close
Close

9V Battery Clip with DC Plug

5.00 EGP

9V Battery Clip with DC Plug This 9V Battery Clip attaches to a 9V battery and the 5.5×2.1mm barrel plug

Close

ATMega328 – With Bootloader for “ARDUINO UNO”

50.00 EGP

The high-performance Atmel picoPower 8-bit AVR RISC-based microcontroller combines 32KB ISP flash memory with read-while-write capabilities, 1024B EEPROM, 2KB SRAM,

Close

Micro USB Male to Type-A Male USB Cable (150cm)

30.00 EGP

High quality molded connectors for tight fit Supports High Speed 480Mbps, Full Speed 12Mbps & Low Speed 1.5Mbps Micro USB

Close

USB Type-B Male to Type-A Male USB Cable (50cm)

10.00 EGP

High quality molded connectors for tight fit Supports High Speed 480Mbps, Full Speed 12Mbps & Low Speed 1.5Mbps USB A

Close

Arduino UNO SMD Microcontroller Development Board & cable

120.00 EGP

The Uno R3 SMD is a budget alternative to the Arduino Uno Boards. It is equipped with an ATMEL AVR ATmega328P microcontroller and a updated

Close

Arduino MEGA – ATmega2560 Microcontroller Development Board with cable

260.00 EGP

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 Digital Input/Output Pins of which

Close

Arduino Nano Microcontroller ATmega328 Development Board $ Cable

95.00 EGP

The Arduino Nano is a compact board similar to the UNO.

-10%
Close

Arduino UNO R3 Microcontroller Development Board + USB Cable

150.00 EGP 135.00 EGP

The board is very popular among students and hobbyists due to its flexibility, ability to connect different robotic parts including sensors, actuators, etc., and a great platform to learn about robots and how they work. The board can be used in various projects from semi-autonomous to autonomous robotics applications.

Close

Adapter 9V 1A

25.00 EGP

AC/DC ADABTER

Model : LJH-186

INPUT ; 100-240V AC   50/60Hz

OUTPUT : 9V DC 1A